русский  |  český

Stormwater Grates to Channels STANDART of 100 series

Cast Iron Slotted Grate to Channels of 100 Series
Item numberLoad classOverall dimension
Length, mmWidth, mmHeight, mmWeight, kg
ДN065 A-C 500 136 38 2,8

Stamped Steel Grate to Channels of 100 Series(without holes)
Item numberLoad classOverall dimension
Length, mmWidth, mmHeight, mmWeight, kg
2А995918 А 1000 136 22  2

Stamped Steel Grate to Channels of 100 Series(with  holes)
Item numberLoad classOverall dimension
Length, mmWidth, mmHeight, mmWeight, kg
2А995919 А 1000 136 22 2
Plastic Grate Volna of Black Color
Item numberLoad classOverall dimension
Length, mmWidth, mmHeight, mmWeight, kg
ДИ019 А 500 136 16 0,4

Plastic Grate Volna of Metallic Color
Item numberLoad classOverall dimension
Length, mmWidth, mmHeight, mmWeight, kg
ДИ019 А 500 136 16 0,4

Plastic Grate Volna of Fern Color
Item numberLoad classOverall dimension
Length, mmWidth, mmHeight, mmWeight, kg
ДИ019 А 500 136 16 0,4

Plastic Grate Volna of Ivory Color
Item numberLoad classOverall dimension
Length, mmWidth, mmHeight, mmWeight, kg
ДИ019 А 500 136 16 0,4
 Welded galvanized Grate 100 B125
Item numberLoad classOverall dimension
Length, mmWidth, mmHeight, mmWeight, kg
2А995948 B 1000 136 20 2,29

These storm grate are designed as completing units for Ecoteck drainage channels of 100 series. Stormwater drainage, or storm sewer system, which you can buy from us, has the following installation purposes:

  • form pathways, which does not hamper street water collection;
  • prevent coarse particles entering, which are able to clog the system;
  • shielding of other construction thereunder.
  • they are sheltering water run-offs thereunder;

All water drain lines mounted in the streets shall be covered with grates.

Storm grate and its alloys

All stormwater drainages are divided according release material they are produced from.

  • storm grids of low pressure, plastic;
  • storm grids for excessive operation, cast iron;
  • storm grids for excessive operation, steel.

Plastic storm grates

What is the reason to install stormwater drainage made of plastic? It has higher service life, plastic is less exposed to climatic changes and it is unresponsive to chemical elements. Due to plastic weight it is possible to cut the costs of installation process, the work can be performed by one worker. Water does not meet resistance on its way, it can be explained by smooth plastic surface, which is hard to say about other materials. Let’s resume: what concerns the price – plastic costs little. Stormwater drainage of low push pressure speaks for itself – it is not meant for traces with high cluster of motor vehicles, it is not used in the industry either. Possibly, the only drawback of plastic is its low strength.

Cast iron storm grares

These grids are intended for most severe loads. They are used in the airports, industrial areas, traces and etc. The main advantage is its strength. Other advantages include anticorrosion resistance and long service life. Cost always conforms to the quality.

Steel storm grates

Sufficient density level is achieved with the preservation of the weight. Service life is defined depending upon type of metal. Steel grate has always an attractive appearance, what means it can be installed in public places. What can scare away buyers – it is the cost of the steel grid. But it is far below than its analogues.

Selection and purchase of storm grates

It is not difficult to buy stormwater drainage, it much more difficult to decide upon its construction and quality. Let’s us mention a number of indicators which will be helpful for you during the selection:

  • load modes and levels. If there are a lot of vehicles and frequent crossings of the stormwater drainage, then one cannot do without steel and cast iron grids. In places with low passing ability for people and cars, plastic products are installed.
  • Dimensions of stormwater drainage. Entire drainage construction shall be isolated by the grid and prevent from unnecessary intrusions inside drain lines.
  • Price indicators. Each business entity shall purchase stormwater drainage, since it is the attribute of cleanness and quality, provided to the customer. But the main task here - to determine a proper grid function, so that the installation of stormwater drainage would not cost much to the business entity.
  • Methods of installation. Stormwater drainage, which you can buy from us, will be well fit for independent mounting. 
Send request
Scroll to Top